Mellanox Compatible 100gbase-Psm4 Qsfp28 1310nm Dfb/Pin 2km OS2 MTP/MPO-12 Parallel SMF Optical Transceiver Module, 4X 25g-Lr, #A0083

• Customization: Available
• Wiring Devices: Fiber Optic Cabling
• Certification: RoHS
• Model NO.: TSQM4-NCNJD3C
• Applications: 100gbase-Psm4
• Data Rate: up to 103.125gbps
• Part Number: Tsqm4-Ncnjd3c
• Tx/Rx: Dfb/Pin
• Reach: 2km
• Transport Package: Nautral or Customized
• Specification: 100G QSFP28 PSM4
• HS Code: 8517795000

Product Description

 

Product Description

Features
Four-channel full-duplex transceiver modules
Transmission data rate up to 26Gbit/s per channel
Up to 2km transmission of single mode fiber
Low power consumption <3.5W
Operating case temperature: 0 to 70ºC
3.3V power supply voltage
Hot Pluggable QSFP28 form factor
RoHS 6 compliant
Single MPO connector receptacle
Built-in digital diagnostic function


Applications
100G Ethernet
Proprietary High Speed Interconnections
Data center


Description
This product is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP28 Transceiver for 100G Ethernet  Applications.
The QSFP28 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 26Gbps operation for an aggregate data rate of 104Gbps 2km using single mode fiber. These modules are designed to operate over single mode fiber systems using 1310nm DFB laser array. An optical fiber ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP28 module receptacle. QSFP28 PSM4 is one kind of parallel transceiver which provides increased port density and total system cost savings.


Absolute maximum ratings
These values represent the damage threshold of the module.  Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.

Parameters	Symbol	Min.	Max.	Unit
Power Supply Voltage	VCC	-0.3	+3.6	V
Storage Temperature	Tc	-40	+85	°C
Relative Humidity	RH	0	85	%

Recommended operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Power Supply Voltage	VCC	3.135	3.30	3.465	V
Operating Case Temperature	Tca	0		70	°C

Electrical characteristics

Parameter	Symbol	Min.	Typical	Max	Unit	Ref.
Transmitter
Input differential impedance	Rin	-	100	-	Ω	1
Differential input voltage amplitude	ΔVin	300		1100	mVp-p
Input Logic Level High	VIH	2.0		VCC	V
Input Logic Level Low	VIL	0		0.8	V
Receiver
Output differential impedance	Rout		100		Ω	1
Differential Output Swing, per lane	Vout	300		800	mVp-p	2
Output Logic Level High	VOH	VCC-0.5		VCC	V
Output Logic Level Low	VOL	0		0.4	V

Notes:
1. AC coupled.
2. Into 100 ohm differential termination.


Transmitter Specifications - Optical

Parameter	Symbol	Min	Typical	Max	Unit	Ref.
Center Wavelength	λC	1295		1325	nm	1
RMS Spectral Width	λrms			3.5	nm	1
Average Launch Power, each lane	PAVG	-9.4		+2.0	dBm
Optical Modulation Amplitude (OMA)	POMA	-4		+2.2	dBm	1
Difference in Launch Power between any two lanes	Ptx,diff			5.0	dB
Transmitter and dispersion penalty (TDP), each lane (max)	TDP			2.9	dBm	1
Rise/Fall Time	Tr/Tf			30	ps
Extinction Ratio	ER	3.5			dB
Relative Intensity Noise	Rin			-128	dB/Hz
Optical Return Loss Tolerance	TOL			20	dB
Transmitter Reflectance	RT			-12	dB
Transmitter Eye Mask Margin	EMM	10			%	2
Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3}		{0.31, 0.4, 0.45, 0.34, 0.38, 0.4}
Average Launch Power OFF Transmitter, each Lane	Poff			-30	dBm

Receiver Specifications - Optical

Parameter	Symbol	Min	Typical	Max	Unit	Ref.
Center Wavelength	λC	1295		1325	nm
Damage Threshold	THd	+3			dBm
Overload, each lane	OVL	+2.5			dBm
Receiver Sensitivity in OMA, each Lane	SEN			-11.35	dBm
Difference in Receive Power between any two Lanes (OMA)	Prx,diff			5.0	dB
Signal Loss Assert Threshold	LOSA	-30			dBm
Signal Loss De-assert Threshold	LOSD			-12	dBm
LOS Hysteresis	LOSH	0.5			dB
Optical Return Loss	ORL			-12	dBm

Notes:
1. Transmitter wavelength, RMS spectral width and power need to meet the OMA minus TDP specs to guarantee link performance.
2. The eye diagram is tested with 1000 waveform.

Please visit T&S Communications Co., Ltd. website for complete information.