Cisco SFP-10g-Sr Compatible 10gbase-Sr SFP+ 850nm Vcsel/Pin 300m Duplex LC Mmf Fiber Optical Transceiver Module, #A0038

• Wiring Devices: Fiber Optic Cabling
• Certification: RoHS
• Applications: 10gbase-Sr
• Competibility: Cisco
• Data Rate: up to 11.3gbps
• Power Dissipation: < 1.0W
• Model NO.: TSSLS-NAACB1C/TSSLS-NAACB1T
• Part Number: Tssp-85192L-Sr
• Wavelength: 850nm
• Tx/Rx: Vcsel/Pin
• Reach: 300m
• Transport Package: Nautral or Customized
• Specification: 10G SFP+ SR

Product Description

 

Product Description

Features
Optical interface compliant to IEEE 802.3ae
Electrical interface compliant to SFF-8431
2-wire interface with integrated Digital Diagnostic monitoring
Hot Pluggable
Data rate up to 11.3Gbps
850nm VCSEL transmitter, PIN photo-detector
Maximum link length of 300m on 2000MHz/km MMF
Power Dissipation < 1.0W
Case operation temperature range:
       Standard: temperature: 0°C to 70°C
       Industrial temperature: -40°C to 85°C
RoHS6 compliant (lead free)


Applications
10GBASE-SR at 10.3125Gbps
10GBASE-SW at 9.95Gbps


Description
The TSSP-85192L-SR series multi-mode transceiver is SFP+ module for duplex optical data communications such as 10GBASE-SR and 10GBASE-SW. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C.
This module is designed for multi-mode fiber and operates at a nominal wavelength of 850 nm. The transmitter section uses a Vertical Cavity Surface Emitted Laser (VCSEL) and is a Class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated GaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.


Absolute Maximum Ratings

Parameters	Symbol	Min.	Max.	Unit
Power Supply Voltage	VCC	-0.5	+3.6	V
Storage Temperature	Tc	-40	+85	°C
Relative Humidity	RH	0	85	%

Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Power Supply Voltage	VCC	3.15	3.30	3.45	V
Supply current	Icc	-	-	290	mA
Operating Case Temperature (Standard)	TCa	0	-	70	°C
Operating Case Temperature (Industrial)	TCa	-40	-	85	°C

Notes:
[1] Supply current is shared between VCCTX and VCCRX.
[2] In-rush is defined as current level above steady state current requirements.


Electrical Characteristics

Parameter	Symbol	Min.	Typical	Max	Unit
Transmitter
Data Rate	Mra	1.0	10.3	11.3	Gbps
Input differential impedance1	Rin	-	100	-	Ω
Differential Input Voltage swing	Vin	150	-	1200	mV
Transmit Disable Voltage	VD	2.0	-	VCC+0.3	V
Transmit Enable Voltage2	Ven	Vee	-	Vee+0.8	V
Transmit Disable Assert Time	Vn	-	-	100	us
Receiver
Data Rate	Mra	-	10.3	11.3	Gbps
Output differential impedance1	Rout	-	100	-	Ω
Differential Output Swing3	Vout	300	-	700	mV
Loss of Signal -Asserted4	-	2.0	-	VCC+0.3	V
Loss of Signal -Negated4	-	Vee	-	Vee+0.8	V

Notes:
[1] AC coupled.
[2] Or open circuit.
[3] Into 100 ohm differential termination.
[4] LOS is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.


Optical Characteristics

Parameter	Symbol	Min.	Typical	Max	Unit
Transmitter
Center Wavelength	λ	840	850	860	nm
Average Optical Power^1	Po	-6.0	-	-1	dBm
Extinction Ratio^2	ER	3.5	-	-	dB
Transmitter Dispersion Penalty	TDP	-	-	3.9	dB
Optical Return Loss Tolerance	ORL	-	-	12	dB
Receiver
Receiver Sensitivity in OMA^3	Rsens	-	-	-11.1	dBm
Stressed Sensitivity in OMA^3	-	-	-	-7.5	dBm
Los function	Los	-30	-	-12	dBm
Receiver Overload^3	Pmax	-1.0	-	-	dBm
Receiver Reflectance	-	-	-	-12	dB

Notes:
[1] The optical power is launched into MMF
[2] Measured with a PRBS 2³¹-1 test pattern @10.3125Gbps
[3] Measured with a PRBS 2³¹-1 test pattern @10.3125Gbps,BER≤10^-12.


Electrical Pad Layout

Parameter	Symbol	Min	Typical	Max	Unit
TX_Fault,RX_LOS	VOL	0	-	0.4	V
	VOH	Host_VCC-0.5	-	Host_VCC+0.3	V
TX_DIS	VIL	-0.3	-	0.8	V
	VIH	2.0	-	VCCT+0.3	V
RS0,RS1	VIL	-0.3	-	0.8	V
	VIH	2.0	-	VCCT+0.3	V

Please visit T&S Communications Co., Ltd. website for complete information.