Customization: | Available |
---|---|
Wiring Devices: | Fiber Optic Cabling |
Certification: | RoHS |
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Features
Optical interface compliant to IEEE 802.3ae 10GBASE-LR
Electrical interface compliant to SFF-8431
Hot Pluggable
Data rate up to 11.3Gbps
1310nm DFB transmitter, PIN photo-detector
Low power consumption < 1.0W
Distance up to 10km
Specifications compliant with SFF 8472
2-wire interface with integrated Digital Diagnostic monitoring
Operating case temperature:
Standard: 0ºC~+70ºC
Industrial: -40ºC~+85ºC
RoHS6 compliant (lead free)
Applications
10GBASE-LR at 10.3125Gbps
10GBASE-LW at 9.95Gbps
Product Description
The TSSLS-NCNCE3 single mode transceiver is small form factor pluggable module for serial optical data communications such as IEEE 802.3ae 10GBASE-LR/LW. It is with the SFP+ 20-pin connector to allow hot plug capability.
This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a 1310nm multiple quantum well DFB laser.
Absolute maximum ratings
These values represent the damage threshold of the module. Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.
Parameters | Symbol | Min. | Max. | Unit |
Power Supply Voltage | VCC | -0.5 | +3.6 | V |
Storage Temperature | Tc | -40 | +85 | °C |
Relative Humidity | RH | 0 | 85 | % |
Parameter | Symbol | Min | Typical | Max | Unit |
Supply Voltage | VCC | 3.15 | 3.3 | 3.45 | V |
Operating Case Temperature (Standard) | Tca | 0 | - | 70 | ºC |
Operating Case Temperature (Industrial) | Tca | -40 | - | 85 | ºC |
Parameter | Symbol | Min. | Typical | Max | Unit | Ref. |
Transmitter | ||||||
Data Rate | Mra | 1.0 | 10.3 | 11.3 | Gbps | |
Input differential impedance | Rin | 100 | Ω | 1 | ||
Differential Input Voltage swing | Vin | 150 | 1200 | mV | ||
Transmit Disable Voltage | VD | 2.0 | - | VCC+0.3 | V | |
Transmit Enable Voltage | Ven | Vee | Vee+0.8 | V | 2 | |
Transmit Disable Assert Time | Vn | - | - | 100 | us | |
Receiver | ||||||
Data Rate | Mra | - | 10.3 | 11.3 | Gbps | |
Output differential impedance | Rout | 100 | Ω | 1 | ||
Differential Output Swing | Vout | 300 | 700 | mV | 3 | |
Loss of Signal -Asserted | - | 2.0 | - | VCC+0.3 | V | 4 |
Loss of Signal -Negated | - | Vee | Vee+0.8 | V | 4 |
Parameter | Symbol | Min | Typical | Max | Unit |
Center Wavelength | λ | 1260 | 1310 | 1355 | nm |
Average Optical Power[1] | Po | -8.2 | - | +0.5 | dBm |
Side Mode Suppression Ratio | SMSR | 30 | - | - | dB |
Average Launch Power of OFF Transmitter | Poff | - | - | -30 | dBm |
Extinction Ratio | ER | 3.5 | - | - | dB |
Optical Return Loss Tolerance | ORL | - | - | 12 | dB |
Eye Mask | Compliant with IEEE 802.3 |
Parameter | Symbol | Min | Typical | Max | Unit |
Center Wavelength | λ | 1260 | - | 1355 | nm |
Receiver sensitivity in OMA[2] | Rsen1 | - | - | -12.6 | dBm |
Receiver Overload | Pmax | 0.5 | dBm | ||
Receiver Reflectance | Rrx | - | - | -12 | dB |
Receive electrical 3 dB upper cutoff frequency | - | - | 12.3 | GHz | |
LOS Asserted | Lsa | -30 | - | - | dBm |
LOS De-Asserted | Lda | - | - | -15 | dBm |
LOS Hysteresis | Lh | 0.5 | - | - | dB |
Parameter | Symbol | Min | Typical | Max | Unit |
TX_Fault,RX_LOS | VOL | 0 | 0.4 | V | |
VOH | Host_VCC-0.5 | Host_VCC+0.3 | V | ||
TX_DIS | VIL | -0.3 | 0.8 | V | |
VIH | 2.0 | VCCT+0.3 | V | ||
RS0,RS1 | VIL | -0.3 | 0.8 | V | |
VIH | 2.0 | VCCT+0.3 | V |