1m (3FT) Cisco Qsfp-4X10g-Aoc 1m Compatible 40g Qsfp+ to 4X10g SFP+ Breakout Active Optical Cable Aoc, #B0014

• Usage: Server
• Certification: RoHS
• Condition: New
• Transport Package: Carton
• Trademark: Customized
• Origin: China
• Model NO.: TSQ4S-85G-001C
• HS Code: 8517795000

Product Description

Features

4-channel full-duplex active optical cable
Data rate up to 10.3125 Gbps per lane
Compliant to the QSFP+ MSA /SFP+ MSA
VCSEL Array Transmitter and PIN Array Receiver
Low Power Dissipation: QSFP+ <1.4W; SFP+ <0.8W                             

Applications

40GBASE SR4 Ethernet
10GBASE SR Ethernet

Product Description

The TSQ4S-85G-XXX is a 4-Channel, Pluggable, Parallel, Fiber-Optic 40G QSFP+ to 4X10G SFP+  AOC. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates 4 data lanes in each direction with 40Gbps bandwidth.
These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38@QSFP+ and 20@SFP+ contact edge type connector.

Absolute Maximum Rating
These values represent the damage threshold of the module.  Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.

Parameters	Symbol	Min.	Max.	Unit
Power Supply Voltage	VCC	-0.5	+3.6	V
Storage Temperature	Tc	-40	+85	°C
Relative Humidity	RH	0	85	%

Recommended Operating Environment
Recommended Operating Environment specifies parameters for which the electrical and optical characteristics hold unless otherwise noted.

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VCC	3.15	3.30	3.45	V
Case Operating Temperature	Tca	0	-	70	ºC
		-40		85	ºC
Data Rate Per Lane	DR	-	10.3125	-	Gbps
Fiber Bend Radius	Rb	3	-	-	cm

Notes:
1. Supply current is shared between VCCTX and VCCRX.
2. In-rush is defined as current level above steady state current requirements.

Transmitter Specifications

Parameter	Symbol	Min	Typical	Max	Unit
Input differential impedance	Rin	90	100	110	Ω
Differential Input Voltage swing, per lane	Vin	300		1100	mV
Transmit Disable Voltage	VD	2.0	-	VCC+0.3	V
Transmit Enable Voltage	Ven	Vee		Vee+0.8	V

Receiver Specifications

Parameter	Symbol	Min	Typical	Max	Unit
Differential Output Swing, per lane	Vout	300		900	mV
Bit Error Rate(Note1)	BER	-	-	10-12
Output Differential Impedance	Rout	90	100	110	Ω
Loss of Signal -Asserted	-	2.0	-	VCC+0.3	V
Loss of Signal -Negated	-	Vee		Vee+0.8	V

Please visit T&S Communications Co., Ltd. website for more information.