Certification: | RoHS |
---|---|
Condition: | New |
Trademark: | Customized |
Origin: | China |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Hot-pluggable SFP56 form-factor connectors
850nm VCSEL laser and PIN photo-detector
Internal CDR circuits on both receiver and transmitter channels
Compliant with SFP56 MSA and IEEE 802.3cd 50GBASE-SR
Data rate up to 53.125Gbps
3.3V power supply voltage
Power consumption < 3W
Case operation temperature range :0°C to 70°C
RoHS compliant (lead free)
56GBASE SR Ethernet
T&S SFP56 Active Optical Cables are direct-attach fiber assemblies with SFP56 connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks. The module is a Single-Channel, Pluggable, Fiber-Optic SFP56 for 50 Gigabit Ethernet and Infiniband EDR Applications.
This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 20 contact edge type connector.
Absolute Maximum Rating
These values represent the damage threshold of the module. Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.
Parameters | Symbol | Min. | Max. | Unit |
Power Supply Voltage | VCC | -0.5 | +3.6 | V |
Storage Temperature | Tc | -40 | +85 | °C |
Relative Humidity | RH | 0 | 85 | % |
Parameter | Symbol | Min | Typical | Max | Unit |
Supply Voltage | VCC | 3.15 | 3.3 | 3.45 | V |
Operating Case Temperature | Tca | 0 | - | 70 | ºC |
Data Rate | DR | - | 53.125 | - | Gbps |
Fiber Bend Radius | Rb | 3 | - | - | cm |
Parameter | Symbol | Min | Typical | Max | Unit |
Input differential impedance | Rin | - | 100 | - | Ω |
Differential Data Input Swing | Vin | 300 | - | 1100 | mV |
Transmit Disable Voltage | VD | 2.0 | - | VCC+0.3 | V |
Transmit Enable Voltage | Ven | Vee | - | Vee+0.8 | V |
Parameter | Symbol | Min | Typical | Max | Unit |
Differential Data Output Swing | Vout | 300 | - | 900 | mV |
Bit Error Rate | BER | - | - | 2.4E-4 | - |
Output Differential Impedance | Rout | - | 100 | - | Ω |
Loss of Signal -Asserted | - | 2.0 | - | VCC+0.3 | V |
Loss of Signal -Negated | - | Vee | - | Vee+0.8 | V |
Note:
1. BER=2.4E-4; [email protected]. Pre-FEC
Please visit T&S Communications Co., Ltd. website for more information.
Suppliers with verified business licenses