Customization: | Available |
---|---|
Wiring Devices: | Fiber Optic Cabling |
Certification: | RoHS |
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Features
All metal housing for superior EMI performance
Operating data rate up to 11.1Gbps
High sensitivity PD photo diode and TIA
LC duplex connector
Hot plug gable 20pin connector
Low power consumption C,E<1 W,T<1.5W
operating wide temperature range:
C:0ºCto 70ºC E:-20ºCto 85ºC T:-40ºCto 85ºC
Single +3.3V±5% power supply
Digital Monitoring SFF-8472 Rev 10.2 compliant
Applications
10GBASE-LR/LW
10G Fiber Channel
SFP+ MSA (SFF-8472)
IEEE802.3ae
Product Description
The laser based 10Gigabit SFP+ Transceiver is designed to transmit and receive serial optical data over single mode optical fiber with 10Km.
They are compliant with SFF-8431,SFF-8432, 10GFC Rev 4.0, and 10GBASE-LR/LW. The transmitter converts serial CML electrical data into serial optical data compliant with the IEEE 802.3ae standard. The receiver converts serial optical data into serial CML electrical data.Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
Package | Data rate | Laser | Optical Power | Detector | Sensitivity | Temp | Reach | Other |
SFP+ | Up to 11.1G | CWDM | 1~7dBm | PIN | < -14.4dBm | 0~70ºC -20~85ºC -40~85ºC |
10km | DDM |
Parameters | Symbol | Min. | Max. | Unit |
Power Supply Voltage | VCC | 0 | +3.6 | V |
Storage Temperature | Tc | -40 | +85 | °C |
Relative Humidity | RH | 5 | 95 | % |
RX Input Average Power | Pmax | - | 0 | dBm |
Parameter | Symbol | Min | Typical | Max | Unit | |
Supply Voltage | VCC | 3.14 | 3.3 | 3.46 | V | |
Operating Case Temperature | Tc | C | 0 | - | 70 | ºC |
E | -20 | 85 | ||||
T | -40 | 85 |
Parameter | Symbol | Min. | Typical | Max | Unit | Notes |
Data Rate | VCC | - | 10.3125 | 11.3 | Gbps | - |
Power Consumption | P | - | - | 1500 | mW | - |
Transmitter | ||||||
Input Differential Impedance | RIN | - | 100 | - | Ω | - |
Single-ended Data Input Swing | VIN | 180 | - | 700 | mVp-p | - |
Transmit Disable Voltage | VDIS | 2 | - | VCCHOST | V | - |
Transmit Enable Voltage | VEN | VEE | - | VEE+0.8 | V | - |
Transmit Fault Assert Voltage | VFA | 2 | - | VCCHOST | V | - |
Transmit Fault De-Assert VoltageVoltage | VFDA | VEE | - | VEE+0.4 | V | - |
Receiver | ||||||
Single-ended Data Output Swing | VOD | 350 | - | 850 | mVp-p | - |
LOS Fault | VLOSFT | 2 | - | VCCHOST | V | - |
LOS Normal | VLOSNR | VEE | - | VEE+0.4 | V | - |
Parameter | Symbol | Min. | Typical | Max | Unit | Notes |
Transmitter | ||||||
Center Wavelength | λ | 1271,1291,1311,1331,1351,1371, 1391,1411,1431,1451,1471,1491 |
nm | - | ||
Wavelength Drift | Δλ | -6.5 | - | +6.5 | nm | - |
Average Output Power | Pavg | 1.0 | - | 7 | dBm | - |
Side Mode Suppression Ratio | SMSR | 30 | - | - | dB | - |
Average Launch Power of OFF Transmitter |
POFF | - | -30 | dBm | ||
Extinction Ratio | ER | 3.5 | - | - | dB | - |
Transmitter Dispersion Penalty | 1271~1331 | - | - | 1 | dB | - |
1351~1371 | - | - | 2 | dB | - | |
1391~1491 | - | - | 3 | dB | - | |
Receiver | ||||||
Center Wavelength | λ | 1260 | - | 1350 | nm | - |
Receiver Sensitivity(AVG) | RSENSE | - | - | -14.4 | dBm | 1 |
Receiver Overload (AVG) | Pmax | 2.2 | - | - | dBm | - |
Optical Return Loss | - | - | - | -26 | dB | - |
LOS Assert | LOSA | -30 | - | - | dBm | - |
LOS De-Assert LOS | LOSD | - | - | -17 | dBm | - |
LOS Hysteresis | RSENSE | 0.5 | 1.9 | - | dB | - |
Note:
Measured at 10.3125Gbps,ER>3.5dB, PRBS 231-1 and BER better than or equal to 10E-12;