5m (16FT) Generic Compatible 56g Qsfp+ Active Optical Cable Aoc, #B0023

• Certification: RoHS
• Condition: New
• Transport Package: Carton
• Trademark: Customized
• Origin: China
• Model NO.: TSQSQ-85H-005C
• HS Code: 8517795000

Product Description

Features

Four-channel full-duplex active optical cable with QSFP+ plugs
Data rate up to 14.0625 Gbps per lane
Transmission distance up to 82m (OM2)/ 300m (OM3)
Compliant to the SFF-8436 Specification
VCSEL Array Transmitter and PIN Array Receiver
Low Power Dissipation <1.4W per end
Case operation temperature range:
           Standard: temperature 0°C to 70°C
           Industrial temperature: -40°C to 85°C                             
RoHS compliant
 

Applications

40GBASE SR4 Ethernet
Infiniband 4xFDR
 

Product Description

The TSQSQ-85H-XXX is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ AOC for 40 Gigabit Ethernet, Infiniband FDR/EDR Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40Gbps bandwidth.

This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector.


Absolute Maximum Rating
These values represent the damage threshold of the module.  Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.

Parameters	Symbol	Min.	Max.	Unit
Power Supply Voltage	VCC	-0.5	+3.6	V
Storage Temperature	Tc	-40	+85	°C
Relative Humidity	RH	0	85	%

Recommended Operating Environment
Recommended Operating Environment specifies parameters for which the electrical and optical characteristics hold unless otherwise noted.

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VCC	3.15	3.30	3.45	V
Operating Case Temperature (Standard)	Tca	0	-	70	ºC
Operating Case Temperature (Industrial)	Tca	-40		85	ºC
Data Rate Per Lane	DR	-	14.0625	-	Gbps
Fiber Bend Radius	Rb	3	-	-	cm

Notes:
1. Supply current is shared between VCCTX and VCCRX.
2. In-rush is defined as current level above steady state current requirements.


Transmitter Specifications

Parameter	Symbol	Min	Typical	Max	Unit
Input differential impedance	Rin	90	100	110	Ω
Differential Input Voltage swing, per lane	Vin	300	-	1100	mV
Transmit Disable Voltage	VD	2.0	-	VCC+0.3	V
Transmit Enable Voltage	Ven	Vee		Vee+0.8	V

Receiver Specifications

Parameter	Symbol	Min	Typical	Max	Unit
Differential Output Swing, per lane	Vout	200	-	1000	mV
Bit Error Rate	BER	-	-	10-12
Output Differential Impedance	Rout	90	100	110	Ω
Loss of Signal -Asserted	-	2.0	-	VCC+0.3	V
Loss of Signal -Negated	-	Vee		Vee+0.8	V

Please visit T&S Communications Co., Ltd. website for more information.