10gbase Bidi SFP+ 1270nm Dfb 1330nm Pin 10km Simplex LC SMF Transceiver Module, #A0047

• Customization: Available
• Wiring Devices: Fiber Optic Cabling
• Certification: RoHS
• Model NO.: TSSLS-CBDCE3C/TSSLS-CBDCE3T
• Power Dissipation: < 1.0W
• Part Number: Tssls-Cbdce3c/Tssls-Cbdce3t
• Tx/Rx: Dfb/Pin
• Reach: 10km
• Transport Package: Nautral or Customized
• Specification: 10G SFP+ BIDI LR
• HS Code: 8517795000

Product Description

 

Product Description

Features
Simplex LC Connector Bi-Directional SFP+ Optical Transceiver
Compliant with SFF-8431, SFF-8432 and IEE802.3ae
Hot Pluggable
Data rate up to 11.3Gbps
1270nm DFB transmitter, 1330nm PIN photo-detector
Low power consumption < 1.0W
Distance up to 10km
Specifications compliant with SFF 8472
2-wire interface with integrated Digital Diagnostic monitoring
Operating case temperature:
Standard: 0ºC~+70ºC
Industrial: -40ºC~+85ºC
RoHS6 compliant (lead free)


Applications
10GBASE-LR at 10.3125Gbps
10GBASE-LW at 9.953Gbps


Product description
The TSSLS-CBDCE3 single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-LR/LW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability.


Absolute Maximum Ratings
These values represent the damage threshold of the module.  Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.

Parameters	Symbol	Min.	Max.	Unit
Supply Voltage	VCC	-0.5	+3.6	V
Storage Temperature	Tc	-40	+85	°C
Relative Humidity	RH	0	85	%

Recommended Operating Conditions

Parameters	Symbol	Min.	Typical	Max.	Unit
Supply Voltage	VCC	3.15	3.3	3.45	V
Operating Case Temperature (Standard)	Tca	0		70	°C
Operating Case Temperature (Industrial)	Tca	-40		85	°C

Notes:
1. Supply current is shared between VCCTX and VCCRX.
2. In-rush is defined as current level above steady state current requirements.


Electrical characteristics

Parameter	Symbol	Min.	Typical	Max	Unit	Ref.
Transmitter
Data Rate	Mra	1.0	10.3	11.3	Gbps
Input differential impedance	Rin		100		Ω	1
Differential Input Voltage swing	Vin	150		1200	mVpp
Transmit Disable Voltage	VD	2.0		VCC+0.3	V
Transmit Enable Voltage	Ven	Vee		Vee+0.8	V	2
Transmit Disable Assert Time	Vn	-	-	100	us
Receiver
Data Rate	Mra	-	10.3	11.3	Gbps
Output differential impedance	Rout		100		Ω	1
Differential data output swing	Vout	300		700	mV	3
Loss of Signal -Asserted	-	2.0	-	VCC+0.3	V	4
Loss of Signal -Negated	-	Vee		Vee+0.8	V	4

Notes:
1. AC coupled.
2. Or open circuit.
3. Into 100 ohm differential termination.
4. LOS is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.


Optical characteristics

Parameter	Symbol	Min.	Typical	Max	Unit	Ref.
Transmitter
Center Wavelength	λ	1260	1270	1280	nm	-
Average Output Power	Po	-5	-	0	dBm	1,2
Side Mode Suppress Ratio	SMSR	30	-	-	dB	-
Optical Modulation Amplitude	OMA	-5.2	-	-	dBm	-
Extinction Ratio	ER	3.5	-	-	dB	-
Optical Return Loss Tolerance	ORL	-	-	12	dB	-
Eye Mask		Compliant with IEEE 802.3
Receiver
Receiver sensitivity in OMA	Rsen	-	-	-14.4	dBm	2,3
Receiver Overload	Pmax	0.5	-	-	dBm	-
Center Wavelength	λ	1320	-	1340	nm	-
Receiver Reflectance	Rrx	-	-	-12	dB	-
LOS De-Assert	Lsa	-	-	-15	dBm	-
LOS Assert	Lda	-30	-	-	dBm	-
LOS Hysteresis	Lh	0.5	-	-	dB	-

Notes:
1. Output is coupled into a 9/125um SMF.
2. A received power below this value cannot be compliant.
3. Measured with a PRBS231-1 test pattern @10.3125Gbps, BER<=10-12


Low Speed Characteristics

Parameter	Symbol	Min	Typical	Max	Unit
Power Consumption	-	-	-	1	W
TX_Fault,RX_LOS	VOL	0	-	0.4	V
	VOH	Host_VCC-0.5	-	Host_VCC+0.3	V
TX_DIS	VIL	-0.3	-	0.8	V
	VIH	2.0	-	VCCT+0.3	V
RS0,RS1	VIL	-0.3	-	0.8	V
	VIH	2.0	-	VCCT+0.3	V

Please visit T&S Communications Co., Ltd. website for complete information.