Cisco Qsfp-100g-Sr4-S Compatible 100gbase-Sr4 Qsfp28 850nm 100m Om4 MPO-12 Parallel Mmf Optical Transceiver Module, 4X 25g-Sr, #A0074

• Customization: Available
• Wiring Devices: Fiber Optic Cabling
• Certification: RoHS
• Model NO.: TSQM4-NAAJA1C
• Applications: 100gbase-Sr4
• Data Rate: up to 25.78125gbps
• Part Number: Tsqm4-Naaja1c
• Tx/Rx: Vcsel/Pin
• Reach: 100m
• Transport Package: Nautral or Customized
• Specification: 100G QSFP28 SR4
• Trademark: Customized
• Origin: China
• HS Code: 8517795000
• Package Size: 20.00cm * 15.00cm * 5.00cm
• Package Gross Weight: 0.300kg

Product Description

 

Features

4 channels full-duplex Transceiver
Transmission data rate 25.78125Gbps per channel
4 channels 850nm VCSEL array
4 channels PIN photo detector array
Hot-pluggable QSFP28 form factor
Low power consumption < 2.5W
Single 1X12 MPO connector receptacle
Hot-pluggable electrical interface
Operating case temperature: 0°C ~+70°C                              
RoHS6 compliant (lead free)

Applications

IEEE 802.3bm 100GBASE SR4

Product Description

The TSQM4-NAAJB1 module is a highly integrated 4x25G transceiver focused on reach, bandwidth, density and cost for high port-count 100G systems, and client-side 100G interfaces. Each lane can operate at 25Gbps up to 70m using OM3 fiber or 100m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38-contact edge type connector. The optical interface uses a 12-fiber MPO connector.


Absolute Maximum Ratings
These values represent the damage threshold of the module.  Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.

Parameters	Symbol	Min.	Max.	Unit
Power Supply Voltage	VCC	-0.5	+3.6	V
Storage Temperature	Tc	-40	+85	°C
Relative Humidity	RH	0	85	%

Recommended Operating Environment
Recommended Operating Environment specifies parameters for which the electrical and optical characteristics hold unless otherwise noted.

Parameter	Symbol	Min	Typical	Max	Unit
Power Supply Voltage	VCC	3.15	3.30	3.45	V
Operating Case Temperature	Tca	0		70	°C
	Tca	-20		85	°C
	Tca	-40		85	°C

Electrical characteristics

Parameter	Symbol	Min.	Typical	Max	Unit	Ref.
Transmitter
Input differential impedance	Rin	-	100	-	Ω	-
Differential Input Voltage swing, per lane	Vin	300	-	1100	mV	-
Input Logic Level High	VIH	2.0	-	VCC+0.3	V	-
Input Logic Level Low	VIL	Vee	-	Vee+0.8	V	-
Receiver
Output differential impedance	Rout		100		Ω	-
Differential Output Swing, per lane	Vout	500		800	mV	-
Output Logic Level High	VOH	2.0	-	VCC+0.3	V	-
Output Logic Level Low	VOL	0		+0.4	V	-

Transmitter Specifications - Optical

Parameter	Symbol	Min	Typical	Max	Unit	Ref.
Signaling Speed per Lane	-	25.78125 ± 100ppm			Gb/s	-
Center Wavelength	λ	840	850	860	nm	-
RMS spectral width	△λ	-	-	0.6	nm	-
Average Launch Power per Lane	Po	-6	-	2.4	dBm	-
Transmit OMA per Lane	OMA	-6.4	-	3	dBm	-
Launch Power [OMA] minus TDEC per Lane	P-TDEC	-7.3	-	-	dBm	-
Extinction Ratio	ER	3	-	-	dB	-
Optical Return Loss Tolerance	ORL	-	-	12	dB	-
Average launch power of OFF transmitter, each lane	-	-	-	-30	dBm	-

Receiver Specifications - Optical

Parameter	Symbol	Min	Typical	Max	Unit	Ref.
Bit Rate per Channel	DR	25.78125 ± 100ppm			Gb/s
Center Wavelength	λ	840	850	860	nm
Damage Threshold	DT	3.4			dBm
Average receive power, each lane	RXPOW	-10.3		2.4	dbm

Note:
1.BER=5E-5; PRBS 2^[email protected].

Please visit T&S Communications Co., Ltd. website for complete information.