1m (3FT) Cisco SFP28-25g-Aoc 1m Compatible 25g SFP28 Active Optical Cable Aoc, #B0008

• Usage: Server
• Certification: RoHS
• Condition: New
• Transport Package: Carton
• Trademark: Customized
• Origin: China
• Model NO.: TSSSS-85E-001C
• HS Code: 8517795000

Product Description

Features

Hot-pluggable SFP28 form-factor connectors
850nm VCSEL laser and PIN photo-detector
Internal CDR circuits on both receiver and transmitter channels
Compliant with SFP28 MSA and IEEE 802.3by 25GBASE-SR
Data rate up to 25.78125Gbps
3.3V power supply voltage
Power consumption < 0.8W per end
Case operation temperature range :
Standard: temperature 0°C to 70°C
Industrial temperature: -40°C to 85°C
RoHS compliant (lead free)

Applications

25GBASE SR Ethernet

Product Description

T&S SFP28 Active Optical Cables are direct-attach fiber assemblies with SFP28 connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks. The module is a Single-Channel, Pluggable, Fiber-Optic SFP28 for 25 Gigabit Ethernet and Infiniband EDR Applications.
These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 20 contact edge type connector.


Absolute Maximum Rating
These values represent the damage threshold of the module.  Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.

Parameters	Symbol	Min.	Max.	Unit
Power Supply Voltage	VCC	-0.5	+3.6	V
Storage Temperature	Tc	-40	+85	°C
Relative Humidity	RH	0	85	%

Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VCC	3.15	3.3	3.45	V
Operating Case Temperature (Standard)	Tca	0	-	70	ºC
Operating Case Temperature (Industrial)	Tca	-40	-	85	ºC
Baud Rate Per Lane	DR		25.78125		Gbps
Fiber Bend Radius	Rb	3	-	-	cm

Notes:
1. Supply current is shared between VCCTX and VCCRX.
2. In-rush is defined as current level above steady state current requirements.

Transmitter Specifications

Parameter	Symbol	Min	Typical	Max	Unit
Input differential impedance	Rin	-	100	-	Ω
Differential Data Input Swing	Vin	300	-	1100	mV
Transmit Disable Voltage	VD	2.0	-	VCC+0.3	V
Transmit Enable Voltage	Ven	Vee		Vee+0.8	V

Receiver Specifications

Parameter	Symbol	Min	Typical	Max	Unit
Differential Data Output Swing	Vout	500	-	800	mV
Bit Error Rate	BER	-	-	10-12
Output Differential Impedance	Rout	-	100	-	Ω
Loss of Signal -Asserted	-	2.0	-	VCC+0.3	V
Loss of Signal -Negated	-	Vee		Vee+0.8	V

Please visit T&S Communications Co., Ltd. website for more information.