Cisco Qdd-400g-Fr4-S Compatible 400gbase-Fr4 Qsfp-Dd CWDM Eml/Pin 2km Duplex LC SMF Optical Transceiver Module, #A0095

• Customization: Available
• Wiring Devices: Fiber Optic Cabling
• Certification: RoHS
• Model NO.: TSDL4-E11MD4C
• Applications: 400gbase-Fr4
• Data Rate: up to 106.25gbps
• Part Number: Tsdl4-E11MD4c
• Tx/Rx: Eml/Pin
• Reach: 2km
• Transport Package: Nautral or Customized
• Specification: 400G QSFP-DD FR4
• HS Code: 8517795000

Product Description

 

Product Description

Features
Hot-pluggable QSFP-DD form factor
4 CWDM lanes MUX/DEMUX design
Duplex LC connector
Compliant to QSFP-DD MSA
100G Lambda MSA 400G-FR4 Specification compliant
Data Rate 106.25Gbps PAM4 per lane
8x53.125Gb/s electrical interface (400GAUI-8)
Up to 2km transmission on single mode fiber (SMF) with FEC
Digital diagnostics functions are available via the I2C interface
Single 3.3V Power Supply and Power Dissipation < 10W
Operating Case Temperature: 0ºC~+70ºC
RoHS compliant
 

Applications
400G Ethernet
Infiniband Interconnect
Data center
Enterprise Networking


Production Description
This product is a 400Gb/s Quad Small Form Factor Pluggable-double density (QSFP-DD) optical module designed for 2km optical communication applications. The module converts 8 channels of 50Gb/s ( PAM4) electrical input data to 4 channels of CWDM optical signals, and multiplexes them into a single channel for 400Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 400Gb/s optical input into 4 channels of CWDM optical signals, and converts them to 8 channels of 50Gb/s (PAM4) electrical output data.
The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G.694.2. It contains a duplex LC connector for the optical interface and a 76-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. Host FEC is required to support up to 2km fiber transmission
The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP-DD Multi- Source Agreement (MSA) Type 2. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.


Absolute maximum rating
These values represent the damage threshold of the module.  Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.

Parameters	Symbol	Min.	Max.	Unit
Power Supply Voltage	VCC	-0.5	+3.6	V
Storage Temperature	Tc	-40	+85	°C
Relative Humidity	RH	0	85	%

Recommended operating environment
Recommended Operating Environment specifies parameters for which the electrical and optical characteristics hold unless otherwise noted.

Parameter	Symbol	Min.	Typical	Max	Unit
Power Supply Voltage	VCC	3.135	3.30	3.465	V
Operating Case Temperature	TCa	0		70	°C

Electrical characteristics
The following electrical characteristics are defined over the Recommended Operating Environment unless otherwise specified.

Parameter	Symbol	Min.	Typical	Max	Unit	Notes
Data Rate per lane	DR	53.125±100ppm			Gbd
Transmitter
Input differential impedance	Rin	90	100	110	Ω
Differential Input Voltage swing	Vin	900	-	1100	mVp-p
Receiver
Differential Output Swing	Vout	-	-	900	mVp-p
Output differential impedance	Rout	90	100	110	Ω

Optical characteristics
The following optical characteristics are defined over the Recommended Operating Environment unless otherwise specified.

Parameter		Symbol	Min.	Typical	Max	Unit	Notes
Transmitter
Center Wavelength	Ch0	λ0	1264.5	1271	1277.5	nm
	Ch1	λ1	1284.5	1291	1297.5
	Ch2	λ2	1304.5	1311	1317.5
	Ch3	λ3	1324.5	1331	1337.5
Data rate, each lane			53.125±100ppm			GBd
Side-mode Suppression Ratio		SMSR	30			dB
Average Optical Power, per lane		Po	-3.3	-	3.5	dBm	1
Extinction Ratio		ER	3.5	-	-	dBm
Transmitter and Dispersion Eye Closure		TDECQ			3.4	dB
Optical Return Loss Tolerance		ORL	-	-	17.1	dB
Receiver
Center Wavelength	Ch0	λ0	1264.5	1271	1277.5	nm
	Ch1	λ1	1284.5	1291	1297.5
	Ch2	λ2	1304.5	1311	1317.5
	Ch3	λ3	1324.5	1331	1337.5
Data rate, each lane			53.125±100ppm			GBd
Average Receive power ,each lane			-7.3		3.5	dBm
Receive power (OMAouter), each lane					3.7	dBm
Receiver sensitivity (OMAouter),each lane					-4.6	dBm	2
LOS Asserted		Lsa	-20	-	-	dBm
LOS De-Asserted		Lda	-	-	-10.3	dBm
LOS Hysteresis		Lh	0.5	-	-	dB

Note:
1. Average launch power, each lane (min) is informative and not the principal indicator of signal strength. A transmitter with launch power below this value cannot be compliant; however, a value above this does not ensure compliance.
2. Measured with conformance test signal at TP3 for BER = 2.4E-4 Pre-FEC
 

Please visit T&S Communications Co., Ltd. website for complete information.