For DELL SFP-10g-Zr Compatible 10gbase-Zr SFP+ 1550nm Eml/Apd 80km Duplex LC SMF Optical Transceiver Module, #A00046

• Customization: Available
• Wiring Devices: Fiber Optic Cabling
• Certification: RoHS
• Model NO.: TSSLS-NFNCK8C
• Data Rate: up to 11.3gbps
• Power Dissipation: < 2.0W
• Part Number: Tssls-Nfnck8c
• Tx/Rx: Eml/Apd
• Reach: 80km
• Transport Package: Nautral or Customized
• Specification: 10G SFP+ ZR 80KM
• HS Code: 8517795000

Product Description

 

Product Description

Features
Compliant to SFP+ MSA
All metal housing for superior EMI performance
Operating data rate up to 11.3Gbps
High sensitivity APD photodiode and TIA
LC duplex connector
Hot pluggable 20pin connector
Low power consumption <2W
0ºC to 70ºC operating wide temperature range
Single +3.3V±5% power supply
Digital Monitoring SFF-8472 Rev10.2 compliant
Fully RoHS Compliant


Applications
10GBASE-ZR/ZW
10G Fiber Channel
SFP+ MSA (SFF-8472)
IEEE802.3ae


Product Description
The laser based 10Gigabit SFP+ Transceiver is designed to transmit and receive serial optical data over single mode optical fiber with 80Km.
They are compliant with SFF-8431,SFF-8432, 10GFC Rev 4.0, and 10GBASE-ZR/ZW. The transmitter converts serial CML electrical data into serial optical data compliant with the IEEE 802.3ae standard. The receiver converts serial optical data into serial CML electrical data.Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.


Absolute maximum ratings
These values represent the damage threshold of the module.  Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.

Parameters	Symbol	Min.	Max.	Unit
Power Supply Voltage	VCC	-0.5	+3.6	V
Storage Temperature	Ts	-40	+85	°C
Relative Humidity	RH	0	95	%

Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VCC	3.14	3.3	3.46	V
Operating Case Temperature	Tc	0	-	70	ºC

Notes:
1. Supply current is shared between VCCTX and VCCRX.
2. In-rush is defined as current level above steady state current requirements.


Electrical characteristics

Parameter	Symbol	Min.	Typical	Max	Unit	Ref.
Transmitter
Data Rate	BR	-	-	11.3	Gbps
Input differential impedance	RIN	80	100	120	Ω	1
Differential Data Input	VIN	180		700	mVp-p
Transmit Disable Voltage	VDIS	2.0	-	VCCHOST	V
Transmit Enable Voltage	VEN	VEE		VEE+0.8	V	2
Transmit Fault Assert Voltage	Vfa	2.0	-	VCCHOST	V
Transmit Fault De-Assert Voltage	VFDA	VEE		VEE+0.4	V
Receiver
Data Rate	BR	-	-	11.3	Gbps
Output differential impedance	Rout	80	100	120	Ω	1
Differential Data Output	VOD	350		850	mVp-p
Output Rise Time	tRISE	25			pS
Output Fall Time	tFALL	25			pS
LOS Fault	VLOSFT	2.0	-	VCCHOST	V
LOS Normal	VLOSNR	VEE		VEE+0.4	V

Notes:
1. AC coupled.
2. Or open circuit.


Transmitter Specifications - Optical

Parameter	Symbol	Min	Typical	Max	Unit
Nominal Wavelength	λ	1530	-	1565	nm
Side Mode Suppression Ratio	SMSR	30	-	-	dB
Average Optical Power	Po	0	-	4	dBm
Extinction Ratio	ER	8.2	-	-	dB
Average Launch Power of OFF Transmitter	POFF	-	-	-30	dBm
Relative Intensity Noise	RIN	-	-	- 128	dB/Hz

Receiver Specifications - Optical

Parameter	Symbol	Min	Typical	Max	Unit
Center Wavelength	λ	1260	-	1620	nm
Receiver sensitivity[1]	RSEN	-	-	-24	dBm
Receiver Sensitivity @80km fiber[2]	RSEN	-	-	-21	dBm
Receiver Overload	PMAX	-7	-	-	dBm
Optical Return Loss	RRL	27	-	-	dB
LOS Asserted	LSA	-37	-	-	dBm
LOS De-Asserted	LDA	-	-	-27	dBm
LOS Hysteresis	LH	0.5	-	-	dB

Notes:
1. Measured at 1528-1600nm, ER>8.2dB, BER less than 10E-12 and PRBS 231 -1 test pattern.
2. loopback using 80km fiber (SMF-28).

Please visit T&S Communications Co., Ltd. website for complete information.