1m (3FT) Generic Compatible 200g Qsfp56 to 4X50g SFP56 Breakout Active Optical Cable, #B0035

• Application: Data Transmission
• Cover Material: PVC
• Certification: RoHS
• Brand: No Brand
• Connector Type: Qsfp56
• Transport Package: Carton
• Model NO.: TSQ4S-85L-001C
• Trademark: Customized
• Origin: China
• HS Code: 8517795000

Product Description

Features

4-channel full-duplex active optical cable
Data rate up to 53.125 Gbps per lane
Compliant to the QSFP56 MSA /SFP56 MSA
VCSEL Array Transmitter and PIN Array Receiver
Low Power Dissipation: QSFP56 <5.5W; SFP56 <3W   
Operating case temperature -5ºC to 70ºC                         
RoHS compliant
 

Applications

IEEE 802.3bm 100GBASE SR4 Ethernet
IEEE 802.3by 25GBASE SR Ethernet
IEEE 802.3cd 200GBASE SR4 Ethernet
IEEE 802.3cd 50GBASE SR Ethernet
 

Product Description

The TSQ4S-85L-XXXC is a 4-Channel, Pluggable, Parallel, Fiber-Optic 200G QSFP56 to 4X50G SFP56  AOC. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates 4 data lanes in each direction with 200Gbps bandwidth.
These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38@QSFP56 and 20@SFP56 contact edge type connector.

Absolute maximum rating
These values represent the damage threshold of the module.  Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.

Parameters	Symbol	Min.	Max.	Unit
Power Supply Voltage	VCC	-0.5	+3.6	V
Storage Temperature	Tc	-40	+85	°C
Relative Humidity	RH	0	85	%

Recommended operating environment
Recommended Operating Environment specifies parameters for which the electrical and optical characteristics hold unless otherwise noted.

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VCC	3.15	3.30	3.45	V
Case Operating Temperature	Tca	-5	-	70	ºC
Data Rate Per Lane	DR	-	53.125	-	Gbps
Fiber Bend Radius	Rb	3	-	-	cm

Notes:
1. Supply current is shared between VCCTX and VCCRX.
2. In-rush is defined as current level above steady state current requirements.

Transmitter Specifications

Parameter	Symbol	Min	Typical	Max	Unit
Input differential impedance	Rin	90	100	110	Ω
Differential Input Voltage swing, per lane	Vin	300	-	1100	mV
Transmit Disable Voltage	VD	2.0	-	VCC+0.3	V
Transmit Enable Voltage	Ven	Vee	-	Vee+0.8	V

Receiver Specifications

Parameter	Symbol	Min	Typical	Max	Unit
Differential Output Swing, per lane	Vout	300	-	900	mV
Bit Error [email protected] Gbps	BER1	-	-	2.4E-4	-
Bit Error [email protected] Gbps	BER2	-	-	5E-5	-
Output Differential Impedance	Rout	90	100	110	Ω
Loss of Signal -Asserted	-	2.0	-	VCC+0.3	V
Loss of Signal -Negated	-	Vee	-	Vee+0.8	V

Please visit T&S Communications Co., Ltd. website for more information.