SFP-10g-Bidi Zr SFP+ 1550nm Eml 1490nm Apd 80km Simplex LC SMF Optic Transceiver, #A0056

• Customization: Available
• Wiring Devices: Fiber Optic Cabling
• Certification: RoHS
• Model NO.: TSSLS-CFECK8T
• Part Number: Tssls-Cfeck8e
• Tx/Rx: Eml/Apd
• Reach: 80km
• Transport Package: Nautral or Customized
• Specification: 10G SFP+ BIDI ZR
• HS Code: 8517795000

Product Description

 

Product Description

Features
Up to 11.3Gb/s data links
1550nm EML laser and APD receiver
Up to 80km on 9/125µm SMF
Hot-pluggable SFP+ footprint
BIDI LC optical connector
RoHS-10 compliant and lead-free
Single +3.3V power supply
Compliant with SFF+MSA and SFF-8472
Support Digital Monitoring interface
Metal enclosure, for lower EMI
Meet ESD requirements, resist 8KV direct contact voltage
Case operating temperature: Industrial: -40 ~ +85ºC


Applications
10GBASE-ZR/ZW & 10G Ethernet
SDH STM64
Other Optical Links


Product Description
The laser based 10Gigabit SFP+ Transceiver is designed to transmit and receive serial optical data over single mode optical fiber with 80Km.
They are compliant with SFF-8431, SFF-8432, 10GFC Rev 4.0, and 10GBASE-ZR/ZW. The transmitter converts serial DML electrical data into serial optical data compliant with the IEEE 802.3ae standard. The receiver converts serial optical data into serial DML electrical data. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.


Absolute maximum ratings
These values represent the damage threshold of the module.  Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.

Parameters	Symbol	Min.	Max.	Unit
Power Supply Voltage	VCC	-0.5	+3.6	V
Storage Temperature	Ts	-40	+85	°C
Relative Humidity	RH	5	95	%
Damage Threshold	THd	0		dBm

Recommended Operating Conditions

Parameter	Symbol		Min	Typical	Max	Unit
Supply Voltage	VCC		3.14	3.3	3.46	V
Operating Case Temperature	T	C	0	-	70	ºC
		E	-10		80
		T	-40		85

Notes:
1. Supply current is shared between VCCTX and VCCRX.
2. In-rush is defined as current level above steady state current requirements.


Electrical characteristics

Parameter	Symbol	Min.	Typical	Max	Unit	Ref.
Transmitter
Data Rate	BR		11.3	-	Gbps
Input differential impedance	RIN	90	100	110	Ω	1
Differential Input Voltage Swing	Vin,pp	180		820	mVpp	2
Transmit Disable Voltage	Vdis	Vcc-1.3		Vcc	V
Transmit Enable Voltage	Ven	Vee		Vee +0.8	V
Receiver
Data Rate	BR	-	11.3	-	Gbps
Output differential impedance	Rout	90	100	110	Ω	1
Differential Data Output	VOD	350		850	mVp-p
Output Rise Time	tRISE	28			pS
Output Fall Time	tFALL	28			pS
LOS Assert Voltage	VlosH	Vcc-1.3		Vcc	V
LOS De-assert Voltage	VlosL	Vee		Vee +0.8	V

Notes:
1. AC coupled.
2. Or open circuit.

Transmitter Specifications - Optical

Parameter	Symbol	Min	Typical	Max	Unit
Center Wavelength		1540	1550	1560
Optical Spectral Width	△λ			1	nm
Side Mode Suppression Ratio	SMSR	30	-	-	dB
Average Optical Power	Po	0	-	5	dBm
Extinction Ratio	ER	8.2			dB
Dispersion Penalty	DP			3.0	dB
Average Launch Power of OFF Transmitter	POFF	-	-	-30	dBm

Receiver Specifications - Optical

Parameter	Symbol	Min	Typical	Max	Unit
Center Wavelength	λ	1480	1490	1500	nm
Receiver Sensitivity (Average Power)	Sen.			-23	dBm
Input Saturation Power (overload)	Psat	-8			dBm
LOS Asserted	LSA	-35	-	-	dBm
LOS De-Asserted	LDA	-	-	-25	dBm
LOS Hysteresis	LH	0.5	-	-	dB

Notes:
1. Measured with Light source 1490nm @1550nm, ER=8.2dB; BER≤1E-12 @10.3125Gbps, PRBS=231 -1 NRZ.

Please visit T&S Communications Co., Ltd. website for complete information.