SFP-10g-Bidi Er SFP+ 1330nm Dfb 1270nm Pin 40km Simplex LC SMF Fiber Optic Transceiver Module, #A0050

• Customization: Available
• Wiring Devices: Fiber Optic Cabling
• Certification: RoHS
• Model NO.: TSSLS-CDBCH3C
• Power Dissipation: < 1.5W
• Part Number: Tssls-Cbdch3c
• Tx/Rx: Dfb/Pin
• Reach: 40km
• Transport Package: Nautral or Customized
• Specification: 10G SFP+ BIDI ER
• HS Code: 8517795000

Product Description

 

Product Description

Features
Up to 11.3Gb/s data links
1330nm DFB Transmitter/1270nm Receiver
Up to 40km on 9/125um SMF
Hot-pluggable SFP+ footprint
BIDI LC optical connector
Single +3.3V power supply
Power Dissipation < 1.5W
Compliant with SFF+MSA, SFF-8431 and SFF-8472
Support Digital Monitoring interface
Case operating temperature:0 ~ +70ºC
RoHS compliant and lead-free
 

Applications
10GBASE-ER at 10.3125Gbps
10GBASE-EW at 9.953Gbps
OBSAI rates 6.144 Gb/s, 3.072 Gb/s, 1.536 Gb/s, 0.768Gb/s
CPRI rates 9.830 Gb/s,7.373Gb/s, 6.144 Gb/s, 4.915 Gb/s, 2.458 Gb/s, 1.229 Gb/s, 0.614Gb/s
Other Optical Links


Product Description
The laser based 10Gigabit SFP+ Transceiver is designed to transmit and receive serial optical data over single mode optical fiber with 40Km.
They are compliant with SFF-8431, SFF-8432, 10GFC Rev 4.0, and 10GBASE-LR/LW. The transmitter converts serial DML electrical data into serial optical data compliant with the IEEE 802.3ae standard. The receiver converts serial optical data into serial DML electrical data. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.


Absolute maximum ratings
These values represent the damage threshold of the module.  Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.

Parameters	Symbol	Min.	Max.	Unit
Power Supply Voltage	VCC	-0.5	+3.6	V
Storage Temperature	Ts	-40	+85	°C
Relative Humidity	RH	5	95	%

Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VCC	3.14	3.3	3.46	V
Operating Case Temperature	T	0	-	70	ºC

Notes:
1. Supply current is shared between VCCTX and VCCRX.


Electrical characteristics

Parameter	Symbol	Min.	Typical	Max	Unit	Ref.
Transmitter
Data Rate	BR		10.3	11.3	Gbps
Input differential impedance	RIN	85	100	115	Ω	1
Differential Input Voltage Swing	Vin,pp	150		1200	mVpp	2
Receiver
Data Rate	BR	-	10.3	11.3	Gbps
Output differential impedance	Rout	85	100	115	Ω	1
Differential Data Output	VOD	350		700	mVp-p

Notes:
1. AC coupled.
2. Or open circuit.


Transmitter Specifications - Optical

Parameter	Symbol	Min	Typical	Max	Unit
Center Wavelength	λ	1320	1330	1340
Optical Spectral Width(-20dB)	△λ			1	nm
Side Mode Suppression Ratio	SMSR	30	-	-	dB
Average Optical Power	Po	1	-	5	dBm
Extinction Ratio	ER	3.5			dB
Average Launch Power of OFF Transmitter	POFF	-	-	-30	dBm

Receiver Specifications - Optical

Parameter	Symbol	Min	Typical	Max	Unit
Center Wavelength	λ	1260	1270	1280	nm
Receiver Sensitivity[1]	Pin			-15	dBm
Receive overload	Pmax	0.5			dBm
LOS Asserted	LSA	-30	-	-	dBm
LOS De-Asserted	LDA	-	-	-18	dBm
LOS Hysteresis	LH	0.5	-	-	dB

Notes:
Measured with worst ER, BER≤1E-12 @10.3125Gbps, PRBS=231 -1 NRZ.

Please visit T&S Communications Co., Ltd. website for complete information.