1m 200g Qsfp56 to 2X100g Qsfp56 Passive Direct Attach Copper Breakout Cable Dac, #C0038

• Customization: Available
• Application: Coaxial Cable
• Cover Material: PVC
• Model NO.: TSQSQ-PC2HG-01M
• Certification: RoHS
• Brand: No Brand
• Temperature Range: 0 °c to 70 °c
• Transport Package: Carton
• Trademark: Customized
• Origin: China
• HS Code: 8517795000

Product Description

Features

Compatible with IEEE 802.3bj and IEEE 802.3cd
Supports aggregate data rates of 200Gbps (PAM4)
Optimized construction to minimize insertion loss and cross talk
Pull-to-release slide latch design
28AWG through 30AWG cable
Straight and break out assembly configurations available
Customized cable braid termination limits EMI radiation
Customizable EEPROM mapping for cable signature
RoHS Compatible

Applications

Switches, servers and routers
Data Center networks
Storage area networks
High performance computing
Telecommunication and wireless infrastructure
Medical diagnostics and networking
Test and measurement equipment
200G Ethernet (IEEE 802.3cd)
InfiniBand
 

Product Description

QSFP56 passive copper cable assembly feature eight differential copper pairs, providing four data transmission channels at speeds up to 56Gbps(PAM4) per channel, and meets 200G Ethernet and InfiniBand requirements. Available in a broad range of wire gages-from 26AWG through 30AWG-this 200G copper cable assembly features low insertion loss and low cross talk.
QSFP56 uses PAM4 signals for transmission, which doubles the rate. However, there are more stringent requirements for cable insertion loss. For detailed requirements, please see High Speed Characteristics.
Designed for applications in the data center, networking and telecommunications markets that require a high speed, reliable cable assembly, this next generation product shares the same mating interface with QSFP+ form factor, making it backward compatible with existing QSFP ports.

Recommended Operation Condition

Parameter	Symbol	Min	Max	Unit
Operating Case Temperature	Topc	0	70	degC
Storage Temperature	Tst	-40	85	degC
Relative Humidity (non-condensation)	RS	35	60	%
Supply Voltage	VCC3	3.135	3.465	V
Voltage on LVTTL Input	Vilvttl	-0.3	VCC3  +0.2	V
Power Supply Current	ICC3	-	15	mA
Total Power Consumption	Pd	-	0.05	W

Notes:
Stress or conditions exceed the above range may cause permanent damage to the device.
This is a stress rating only and functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not applied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Pin Descriptions

Pin	Logic	Symbol	Description
1	-	GND	Ground
2	CML-I	Tx2n	Transmitter Inverted Data Input
3	CML-I	Tx2p	Transmitter Non-Inverted Data Input
4	-	GND	Ground
5	CML-I	Tx4n	Transmitter Inverted Data Input
6	CML-I	Tx4p	Transmitter Non-Inverted Data Input
7	-	GND	Ground
8	LVTTL-I	ModSelL	Module Select
9	LVTTL-I	ResetL	Module Reset
10	-	Vcc Rx	+3.3V Power Supply Receiver
11	LVCMOS-	SCL	2-wire serial interface clock
	I/O
12	LVCMOS-	SDA	2-wire serial interface data
	I/O
13	-	GND	Ground
14	CML-O	Rx3p	Receiver Non-Inverted Data Output
15	CML-O	Rx3n	Receiver Inverted Data Output
16	-	GND	Ground
17	CML-O	Rx1p	Receiver Non-Inverted Data Output
18	CML-O	Rx1n	Receiver Inverted Data Output
19	-	GND	Ground
20	-	GND	Ground
21	CML-O	Rx2n	Receiver Inverted Data Output
22	CML-O	Rx2p	Receiver Non-Inverted Data Output
23	-	GND	Ground
24	CML-O	Rx4n	Receiver Inverted Data Output
25	CML-O	Rx4p	Receiver Non-Inverted Data Output
26	-	GND	Ground
27	LVTTL-O	ModPrsL	Module Present
28	LVTTL-O	IntL	Interrupt
29	-	Vcc Tx	+3.3V Power supply transmitter
30	-	Vcc1	+3.3V Power supply
31	LVTTL-I	LPMode	Low Power Mode
32	-	GND	Ground
33	CML-I	Tx3p	Transmitter Non-Inverted Data Input
34	CML-I	Tx3n	Transmitter Inverted Data Input
35	-	GND	Ground
36	CML-I	Tx1p	Transmitter Non-Inverted Data Input
37	CML-I	Tx1n	Transmitter Inverted Data Input
38	-	GND	Ground

Please visit T&S Communications Co., Ltd. website for more information.