Cisco Qsfp-100g-Zr4-S Compatible 100gbase-Zr4 Qsfp28 Lwdm Eml/Pin 80km OS2 Duplex LC SMF Optical Transceiver Module, #A0084

• Customization: Available
• Wiring Devices: Fiber Optic Cabling
• Certification: RoHS
• Model NO.: TSQL4-F22JK8C
• Applications: 100gbase-Zr4
• Data Rate: up to 103.125gbps
• Part Number: Tsql4-F22jk8c
• Tx/Rx: Lwdm Eml/Pin
• Reach: 80km
• Transport Package: Nautral or Customized
• Specification: 100G QSFP28 ZR4
• HS Code: 8517795000

Product Description

 

Product Description

Features
Compliant with 100GBASE-ZR4
Support line rates from 103.125 Gb/s to 111.81 Gb/s OTU4
LAN WDM EML laser and PIN receiver with SOA
Up to 80km reach for G.652 SMF
Hot pluggable 38 pin electrical interface
QSFP28 MSA compliant
Duplex LC optical receptacle
RoHS-10 compliant and lead-free
Single +3.3V power supply
Maximum power consumption 6.5W
Case operating temperature:  0 ~ +70ºC


Applications
100GBASE-ZR4 Ethernet Links
Infiniband QDR and DDR interconnects
Telecom networking


Description
This product is designed for 80km optical communication applications. This module contains 4-lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial inter-face. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector.
The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP+ Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.


Absolute Maximum Ratings
These values represent the damage threshold of the module.  Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.

Parameters	Symbol	Min.	Max.	Unit
Supply Voltage	VCC	-0.5	+3.6	V
Storage Temperature	Tc	-40	+85	°C
Relative Humidity	RH	0	85	%

Recommended operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Power Supply Voltage	VCC	3.13	3.3	3.47	V
Operating Case Temperature	Tca	0		70	°C
Link Distance	D	-	-	80	km

Electrical characteristics

Parameter	Symbol	Min.	Typical	Max	Unit	Ref.
Transmitter
Input differential impedance	Rin	90	100	110	Ω	1
Differential Input Voltage Amplitude	Vin	-	-	900	mVp-p	2
Receiver
Output differential impedance	Rout	90	100	110	Ω	1
Differential Output Voltage Amplitude	Vout	300	-	900	mVp-p	3

Notes:
1. AC coupled.
2. Differential input voltage amplitude is measured between TxnP and TxnN.
3. Differential output voltage amplitude is measured between RxnP and RxnN.


Transmitter Specifications - Optical

Parameter		Symbol	Min	Typical	Max	Unit
Center Wavelength	Ch0	λ0	1294.53	1295.56	1296.59	nm
	Ch1	λ1	1299.02	1300.05	1301.09	nm
	Ch2	λ2	1303.54	1304.58	1305.63	nm
	Ch3	λ3	1308.09	1309.14	1310.09	nm
Bit Rate per Channel		B	25.78125±100ppm			Gb/s
Side Mode Suppression Ratio		SMSR	30	-	-	dB
Average launch power, each lane			2.0		6	dBm
Launch power in OMA minus TDP, each lane		OMA-TDP	-0.65			dBm
Transmission & dispersion penalty, each lane		TDP			2.5	dB
Relative Intensity Noise		RIN			-130	dB/Hz
Transmitter Reflectance					-20	dB
Extinction Ratio		ER	6			dB
Transmitter eye mask definition {X1, X2, X3, Y1, Y2, Y3}		{0.25, 0.4, 0.45, 0.25, 0.28, 0.4}
Average launch power of OFF transmitter, each lane					-30	dBm
Optical return loss tolerance					20	dB

Receiver Specifications - Optical

Parameter		Symbol	Min	Typical	Max	Unit
Center Wavelength	Ch0	λ0	1294.53	1295.56	1296.59	nm
	Ch1	λ1	1299.02	1300.05	1301.09	nm
	Ch2	λ2	1303.54	1304.58	1305.63	nm
	Ch3	λ3	1308.09	1309.14	1310.09	nm
Bit Rate per Channel		B	25.78125±100ppm			Gb/s
Damage threshold, each lane			6.5			dBm
Average receive power, each lane			-28.0		-7	dbm
Unstressed Sensitivity (OMA) at 5 x 10-5 BER		OMAin	-	-	-28	dBm
LOS Assert		LOSA	-40			dBm
LOS De-assert		LOSD			-29	dBm

Please visit T&S Communications Co., Ltd. website for complete information.