1m (3FT) Cisco Compatible 100g Qsfp28 to 2X50g Qsfp28 Active Optical Breakout Aoc Cable, #B0028

• Application: Data Transmission
• Cover Material: PVC
• Certification: RoHS
• Brand: No Brand
• Connector Type: Qsfp28
• Transport Package: Carton
• Model NO.: TSQ2Q-85J-001C
• Trademark: Customized
• Origin: China
• HS Code: 8517795000

Product Description

Features

Four-channel full-duplex active optical cable with QSFP28 plugs
Compliant to the IEEE 802.3bm(100GBASE-SR4)
Compliant to the SFF-8665 Specification
4 channels 850nm VCSEL array
4 channels PIN photo detector array
Low Power Dissipation : <2.2W 100GBASE-SR4 QSFP28 end;
                      <1.5W 50GBASE-SR2 QSFP28 end
Operating case temperature :  Standard: temperature 0ºC to 70ºC  
                            Industrial temperature -40ºC to 85ºC                           
RoHS compliant
 

Applications

IEEE 802.3bm 100GBASE SR4 Ethernet
 

Product Description

The TSQ2Q-85J-XXX is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP28 AOC for 100 Gigabit Ethernet, Infiniband FDR/EDR Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 100Gbps bandwidth.
This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector.

Absolute maximum rating
These values represent the damage threshold of the module.  Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.

Parameters	Symbol	Min.	Max.	Unit
Power Supply Voltage	VCC	-0.5	+3.6	V
Storage Temperature	Tc	-40	+85	°C
Relative Humidity	RH	0	85	%

Recommended operating environment
Recommended Operating Environment specifies parameters for which the electrical and optical characteristics hold unless otherwise noted.

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VCC	3.15	3.30	3.45	V
Case Operating Temperature	Tca	0	-	70	ºC
	Tca	-40		85	ºC
Data Rate Per Lane	DR	-	25.78125	-	Gbps
Fiber Bend Radius	Rb	3	-	-	cm

Notes:
1. Supply current is shared between VCCTX and VCCRX.
2. In-rush is defined as current level above steady state current requirements.

Transmitter Specifications

Parameter	Symbol	Min	Typical	Max	Unit
Input differential impedance	Rin	90	100	110	Ω
Differential Input Voltage swing, per lane	Vin	300	-	1100	mV
Transmit Disable Voltage	VD	2.0	-	VCC+0.3	V
Transmit Enable Voltage	Ven	Vee	-	Vee+0.8	V

Receiver Specifications

Parameter	Symbol	Min	Typical	Max	Unit
Differential Output Swing, per lane	Vout	500	-	800	mV
Bit Error Rate	BER	-	-	10-12	-
Output Differential Impedance	Rout	90	100	110	Ω
Loss of Signal -Asserted	-	2.0	-	VCC+0.3	V
Loss of Signal -Negated	-	Vee	-	Vee+0.8	V

Please visit T&S Communications Co., Ltd. website for more information.